In a conventional (or "continuous wave") spectrometer, a sample is exposed to electromagnetic radiation and the response (usually the intensity of transmitted radiation) is monitored. The energy of the radiation is varied over the desired range and the response is plotted as a function of radiation energy (or frequency). At certain resonant frequencies characteristic of the specific sample, the radiation will be absorbed resulting in a series of peaks in the spectrum, which can then be used to identify the sample.
(In magnetic spectroscopy, the magnetic field is often varied instead
of the frequency of the incident radiation, though the spectra are
effectively the same as if the field had been kept constant and the
frequency varied. This is largely a question of experimental
convenience.)
Instead of varying the energy of the electromagnetic radiation, Fourier Transform spectroscopy exposes the sample to a single pulse of radiation and measures the response.
The resulting signal, called a free induction decay, contains a rapidly decaying composite of all possible frequencies.
Due to resonance by the sample, resonant frequencies will be dominant in the signal and by performing a mathematical operation called a Fourier transform on the signal the frequency response can be calculated.
In this way the Fourier transform spectrometer can produce the same kind of spectrum as a conventional spectrometer, but in a much shorter time.
The principles of the Fourier transform approach can be compared to the behavior of a musical tuning fork.
If a tuning fork is exposed to sound waves of varying frequencies, it will vibrate when the sound wave frequencies are in "tune".
This is similar to conventional spectroscopic techniques, where the radiation frequency is varied and those frequencies where the sample is in "tune" with the radiation detected.
However, if we strike the tuning fork (the equivalent of applying a pulse of radiation), the tuning fork will tend to vibrate at its characteristic frequencies.
The resulting tone consists of a combination of all of the characteristic frequencies for that tuning fork.
Similarly the response from a sample exposed to a pulse of radiation is a signal consisting primarily of the characteristic frequencies for that sample. The Fourier tranform is a mathematical technique for determining these characteristic frequencies from a single composite signal.How it works